Cart
0
0.00 €
What is SabetoFLEX Accelerator Glue?
SabetoFLEX Accelerator Glue is a specialised PIB-based adhesive and adhesion promoter for EasyFLEX and SabetoFLEX system build-ups. It is used for sealing overlaps between PIB roofing membrane rolls and for preparing difficult or porous surfaces where standard adhesives may not provide sufficient adhesion.
The product is based on polyisobutylene, PIB and naphtha, and is developed for applications where adhesion, sealing and system compatibility are critical. It can be used in professional roofing and membrane systems where substrates, joints and overlaps must be carefully assessed before installation.
The Accelerator Glue is manufactured using recycled residual material from SabetoFLEX's patented recycling system and contains no PFAS. It must be handled in accordance with the safety data sheet and used with appropriate ventilation, protective equipment and project assessment.
Key product points
Areas of application
SabetoFLEX Accelerator Glue is used as a specialised glue and adhesion promoter in EasyFLEX and SabetoFLEX system build-ups where adhesion, sealing and material compatibility are critical.
The product is particularly relevant for PIB-based membranes, difficult substrates, porous surfaces and joints where additional focus on adhesion and overlaps is required.
Typical applications include:
- Sealing overlaps between EasyFLEX PIB roofing membrane rolls
- Improving adhesion on difficult or porous surfaces
- Surface preparation before installing relevant PIB-based products
- Joints, overlaps and local detailing
- Professional roofing and membrane systems requiring system compatibility
- Projects where PFAS-free materials and circular production form part of the assessment
The substrate, surface condition, ventilation, temperature, material type and project requirements must always be assessed before use.
| Product type | PIB-based glue and adhesion promoter |
|---|---|
| Application | Overlaps between PIB roofing membrane rolls, difficult surfaces and porous substrates |
| Material | Polyisobutylene, PIB and naphtha |
| Colour | Transparent to pale yellow |
| Density | Approximately 0.78 g/cm³ |
| Flash point | >60 °C |
| Packaging | 5-litre plastic container |
| Environmental profile | Manufactured from recycled residual material and contains no PFAS |
The table shows selected key data. Always consult the technical data sheet and safety data sheet before use. Product suitability depends on the substrate, material type, ventilation, temperature, application method and project requirements.
How to use the product
SabetoFLEX Accelerator Glue is used as a specialised glue and adhesion promoter in PIB-based EasyFLEX and SabetoFLEX system build-ups. Typical uses include sealing overlaps between PIB roofing membrane rolls and preparing difficult or porous surfaces.
Application notes
SabetoFLEX Accelerator Glue must be used in accordance with the relevant EasyFLEX or SabetoFLEX system specification.
It is intended for professional applications where the substrate, overlap, ventilation, temperature and material compatibility must be assessed before use. Always provide adequate ventilation and use the required personal protective equipment.
Avoid contact with skin and eyes. Store tightly closed in the original packaging in a cool, dry and well-ventilated place, protected from frost and direct sunlight.
Always consult the technical data sheet and safety data sheet before use.
A typical workflow includes:
- Inspect and assess the substrate, overlap or joint
- Clean the surface and remove dust, dirt and loose material
- Ensure suitable working conditions, ventilation and protective equipment
- Apply SabetoFLEX Accelerator Glue to the relevant area
- Install, join or seal according to the selected system build-up
- Check the overlap, adhesion and finished detail
Related system products
SabetoFLEX Accelerator Glue is used within the EasyFLEX system for overlaps, PIB details and applications where secure adhesion and sealing are particularly important.
PIB roofing membrane supplied in rolls for flat and low-pitched roofs, with flame-free installation.
Prefabricated PIB corners for details, corners, terminations and difficult connections.
Spray adhesive for fast, flame-free installation of membrane and system components.
Reinforcement mesh for additional strengthening and stability in selected build-ups.
Need advice or have a question about the right solution? Contact EasyFLEX Roofing, and we'll help you move the project forward.
Documentation
Find the relevant documentation for SabetoFLEX Accelerator Glue. The technical data sheet and safety data sheet are collected here, so you can quickly access the file you need.
Technical data sheet
SabetoFLEX Accelerator Glue – Technical Data Sheet
Product data, applications, materials, packaging, safety information and environmental product details.
Safety data sheet
SabetoFLEX Accelerator Glue – Safety Data Sheet
Safety information covering handling, storage, protective equipment, first aid, firefighting measures and disposal.