Cart
0
0.00 kr.
Sabeto Shield in Building Services and Technical Areas
12/05/2026
Sabeto Shield Coating can be used in plant rooms and technical environments where plinths, transitions and exposed details need added protection against moisture, wear and everyday use.
Built for technical environments
Plant rooms, service areas and building-services environments are often exposed to moisture, pipework, maintenance activity, cleaning and ongoing wear. This places greater demands on the surrounding surfaces.
Sabeto Shield Coating can form part of a flexible coating solution for selected areas where the surface needs additional protection against moisture, wear and daily operational demands.
Details, transitions and local protection
Technical rooms do not always need a full surface renovation. Often, the real challenge is concentrated around plinths, pipe penetrations, transitions, local repairs and other exposed details.
Sabeto Shield Coating can be applied exactly where extra protection is needed, creating a seamless finish around areas where moisture, movement and regular maintenance place greater demands on the surface.
Where can Sabeto Shield be used?
Typical application areas:
- Plant rooms and service areas
- Plinths and wall-to-floor transitions
- Local repairs
- Exposed details around technical installations
- Surfaces affected by moisture
- Smaller areas exposed to wear from operation and maintenance
Where required, the system can also be combined with sand to create a more slip-resistant or wear-resistant surface in selected zones.
The correct primer is essential for adhesion and durability.
Primer and the right system build-up
Choosing the correct primer is essential for reliable adhesion and long-term performance. The right product depends on the substrate, the level of exposure and the specific project conditions.
A typical system consists of a primer followed by two coats of Sabeto Shield Coating. Sabeto Shield PU Primer may be suitable for concrete, cement-based and mineral substrates, while Sabeto Shield Metal Primer is intended for iron and steel, where proper surface preparation is critical.
EasyFLEX Roofing can help assess the substrate, primer choice and expected material consumption for the project.
Relevant products for the system build-up
Choose Sabeto Shield Coating together with the appropriate primer for substrate preparation, adhesion and the correct system build-up. Primer selection should always be based on the substrate and the specific project conditions.
Water-based PU coating for the protection, sealing and waterproofing of demanding surfaces.
Primer for substrate preparation and adhesion on concrete, cement-based surfaces and mineral-surfaced bitumen.
Anti-corrosive primer for iron and steel where correct surface preparation is essential.
Do you have a building-services or technical-area project?
Sabeto Shield Coating may be suitable for plant rooms, plinths, details, local repairs and exposed surfaces in technical environments.
Contact EasyFLEX Roofing for guidance on the substrate, primer, system build-up or the most suitable solution for your project.