Cart
0
0.00 €
What is Sabeto Shield PU Primer?
Sabeto Shield PU Primer is a fast-drying, water-based hybrid primer based on acrylic and polyurethane resins. It is used as a primer before applying water-based coating systems and waterproofing build-ups such as Sabeto Shield Coating.
The primer helps prepare and stabilise suitable substrates and supports adhesion within the complete system build-up. Primer selection and consumption must always be assessed according to substrate type, absorbency, condition and project requirements.
Key product points
• Water-based hybrid primer
• For concrete, cementitious substrates and mineral-surfaced bitumen
• Fast-drying and ready to use
• Dry to recoat after approx. 2 hours at +23 °C
• Typical consumption: approx. 200–300 g/m² depending on substrate
• Supports adhesion before applying Sabeto Shield Coating
Application areas
Sabeto Shield Metal Primer can be used on suitable metal surfaces before applying Sabeto Shield Coating.
Typical application areas include:
- Iron
- Steel
- New metal surfaces
- Existing metal surfaces
- Outdoor metal surfaces requiring anti-corrosive protection
- Technical metal areas, details and local repairs
The metal surface must be dry, clean and free from dust, oil, grease, rust, loose material and weak coatings before application.
Role in the coating system
Sabeto Shield PU Primer is applied before Sabeto Shield Coating to prepare the substrate and support adhesion between the substrate and coating.
A typical workflow includes:
- Inspection and preparation of the substrate
- Cleaning and removal of loose material
- Application of Sabeto Shield PU Primer
- Drying time before the following layer
- Application of Sabeto Shield Coating according to the recommended system build-up
Application notes
The product must be stirred before use and can be applied by roller, brush or suitable spray equipment depending on the project and substrate.
Do not apply under wet conditions, during rain or if rain is expected before the primer has dried. The substrate temperature must be at least 3 °C above the dew point.
Where increased anti-corrosive protection is required, an additional primer layer may be relevant. This must be assessed according to surface condition, exposure and project requirements.
Documentation
Find the relevant documentation for Sabeto Shield Coating. Technical data sheets, safety information, test reports and certificates are collected here, making it easy to locate the exact document you need.
Technical data sheet
Sabeto Shield PU Primer – Technical Data Sheet
Product information, application areas, consumption, technical properties and application guidance.
Safety data sheet
Sabeto Shield PU Primer – Safety Data Sheet
Information about handling, storage, personal protective equipment and safety precautions.