Cart
0
0.00 kr.
What is ElaProof Classic H?
ElaProof Classic H is a water-based, hand-applied elastic coating for professional waterproofing and coating projects. It is particularly suited to details, transitions, joints, smaller surfaces and local repairs where precise application is important.
The coating forms a flexible, seamless membrane and can be used in system build-ups requiring waterproofing, protection and elastic surface treatment on suitable substrates. The substrate, film thickness, application method and project conditions must always be assessed before use.
Product highlights
Areas of application
- Details and transitions
- Joints and corners
- Smaller surfaces
- Local repairs
- Cracks and moving details
- Technical penetrations and connections
ElaProof Classic H can be used on suitable substrates where a hand-applied elastic coating is required for waterproofing, protection or local repair.
Typical applications include:
The substrate must be stable, clean and suitable for the selected system build-up. Film thickness, coverage and any reinforcement requirements must be assessed according to the application and project conditions.
| Product type | Water-based elastic coating / polymer dispersion |
|---|---|
| Application method | Hand application using suitable tools |
| Colours | Black, grey, red, RR11, RR23 and RR32 |
| Drying time | Touch-dry after approximately 3–4 hours at +20 °C and 50% RH |
| Elasticity | Elongation at break approximately 810% |
| Crack-bridging ability | Class A5 at +22 °C and A4 at −20 °C |
| Watertightness | Watertight when tested |
| Temperature resistance | Long-term resistance from −30 °C to +150 °C |
| Documentation | CE marked in accordance with EN 13813 and EN 1504-2 |
Values are typical and depend on the substrate, film thickness, temperature, humidity and project conditions. Always consult the technical data sheet before use.
How to use the product
ElaProof Classic H is applied manually and is well suited to applications where the coating must be worked precisely around details, edges, joints and transitions.
Manual application of ElaProof Classic H around a wall-to-floor transition.
A typical workflow includes:
- Inspect and prepare the substrate
- Remove dust, dirt and loose material
- Apply primer or other surface preparation where required
- Apply ElaProof Classic H using suitable hand tools
- Reinforce cracks, corners, joints or other critical details where required
- Check film thickness, coverage and finish
Application notes
ElaProof Classic H can be applied manually using a trowel, brush or another suitable tool selected according to the task.
When sealing around cracks, corners, joints or other critical details, reinforcement tape or another suitable reinforcement may be required between coats.
Apply only under suitable temperature and substrate conditions. Always consult the technical data sheet before use.
Related product: ElaProof Primer
We recommend assessing whether a primer is required as part of the surface preparation before applying an ElaProof coating. On porous substrates, ElaProof Primer is used to improve adhesion and help seal pores in the surface.
Documentation
Find the relevant documentation for ElaProof Classic H. Technical data sheets, Declarations of Performance, environmental data and relevant test documentation are collected here, so you can quickly access the file you need.
Technical data sheet
ElaProof Classic H – Technical Data Sheet
Product data, technical properties, colours, drying times, temperature resistance and application information.
Safety data sheet
Safety Data Sheet for the ElaProof product range
Information on handling, storage, protective measures and safety.
Declarations of Performance / DoP
DoP – EN 1504-2, ElaProof Classic H & ElaProof PRO S
Declaration of Performance for concrete surface protection, including documentation for moisture control, resistance to water ingress and physical resistance.
DoP – EN 13813, ElaProof
Declaration of Performance for the relevant flooring and surface system documentation.
Environmental documentation
EPD – ElaProof H
Environmental Product Declaration for ElaProof H, prepared in accordance with EN 15804+A2 and ISO 14025 / ISO 21930.
Tests and certificates
Fire classification – C-s1,d0
Documentation of the fire classification for the ElaProof product range.
Open fire classification documentation →
Radon barrier – ElaProof
Documentation of ElaProof as a radon barrier, based on measured radon transmission.