Cart
0
0.00 €
What is EasyFLEX Adhesive Spray?
EasyFLEX Adhesive Spray is a sprayable contact adhesive developed for professional installation tasks where fast application, strong adhesion and an efficient workflow are required.
Within the EasyFLEX system, it is used to install PIB membranes, PIB vapour barriers and EasyFLEX reinforcement mesh as part of the roof build-up. It can also be used on other suitable substrates and materials where the product's technical properties and the project requirements are compatible.
The adhesive has a short drying time and a practical open time, providing flexibility during installation. The substrate, temperature, humidity, material type and system build-up must always be assessed before use.
Key product points
Equipment note: When using the 22-litre canister, a suitable spray gun and hose are required.
Contact us for guidance if you are unsure about the correct setup.
Areas of application
EasyFLEX Adhesive Spray is used as a system adhesive in professional EasyFLEX roof build-ups where PIB membranes, PIB vapour barriers or EasyFLEX reinforcement mesh need to be installed quickly and efficiently.
The product is relevant for roof systems where a sprayable contact adhesive supports a fast workflow, even coverage and flexibility during installation.
Typical applications include:
- Installation of EasyFLEX PIB roofing membrane rolls
- Installation of PIB vapour barrier membranes
- Installation of EasyFLEX reinforcement mesh
- Multi-layer roof build-ups and system components
- Details, connections and local installation tasks
- Professional applications where fast drying and practical open time are important
Surfaces must be clean, dry and free from dust, grease, oil and loose material before application.
| Product type | Sprayable contact adhesive |
|---|---|
| Application | Installation of PIB membranes, PIB vapour barriers, EasyFLEX reinforcement mesh and relevant system components |
| Drying time | Approximately 1–2 minutes, depending on the substrate, temperature and humidity |
| Open time | Up to 60 minutes |
| Heat resistance | Up to 100 °C |
| Colour | Colourless |
| Spray pattern | Web spray |
| Pack sizes | 22-litre canister and 500 ml aerosol |
| Fire classification | A2-s1,d0 in accordance with EN 13501-1:2018 for the documented application |
| Indicative coverage | 22 L: up to 100 m² | 500 ml: up to 2.2 m² |
The table shows selected key data. Always consult the technical data sheet and safety data sheet before use. Product suitability depends on the substrate, temperature, humidity, application method and project requirements.
How to use the product
EasyFLEX Adhesive Spray is used as a contact adhesive and is applied to both surfaces that are to be bonded. It is used for installing PIB membranes, PIB vapour barriers and EasyFLEX reinforcement mesh in EasyFLEX roof build-ups.
Application notes
When using the canister system, hold the spray gun at approximately 90° to the surface. Apply an even coat to both substrates, preferably in a vertical direction on one surface and a horizontal direction on the other.
When using the aerosol, hold the can at approximately 70° to the surface. Apply an even coat to both substrates with 80–100% coverage.
Drying time is typically 1–2 minutes, depending on the substrate, temperature and humidity. Once the adhesive is tacky, bring the surfaces together and press them evenly.
Do not use the product on flexible PVC or expanded polystyrene. Always consult the technical data sheet and safety data sheet before use.
A typical workflow includes:
- Inspect the substrates and materials
- Clean the surfaces so they are dry and free from dust, grease and oil
- Apply adhesive to both surfaces
- Ensure even application with 80–100% coverage
- Allow a short drying period until the adhesive becomes tacky
- Join the materials within the product's open time
- Apply even pressure from the centre towards the edges
Related system products
EasyFLEX Adhesive Spray is used as a system adhesive in EasyFLEX roof build-ups, allowing membranes, reinforcement and detailing components to be installed efficiently and consistently.
PIB roofing membrane supplied in rolls for flat and low-pitched roofs, with flame-free installation.
Reinforcement mesh for additional strengthening and stability in selected build-ups.
PIB-based glue for sealing overlaps between PIB roofing membrane rolls and relevant PIB details.
Prefabricated PIB corners for details, corners, terminations and difficult connections.
Need advice or have a question about the right solution? Contact EasyFLEX Roofing, and we'll help you move the project forward.
Documentation
Find the relevant documentation for EasyFLEX Adhesive Spray. The technical data sheet, safety information and fire-classification documentation are collected here, so you can quickly access the file you need.
Technical data sheet
EasyFLEX Adhesive Spray – Technical Data Sheet
Product data, applications, technical key data, indicative coverage, application guidance, storage and limitations.
Safety data sheet
EasyFLEX Adhesive Spray 500 ml – Safety Data Sheet
Safety information for the aerosol version, including handling, storage, protective equipment, transport and disposal.
Open safety data sheet 500 ml →
EasyFLEX Adhesive Spray 22 L – Safety Data Sheet
Safety information for the 22-litre canister version, including handling, storage, protective equipment, transport and disposal.
Fire classification
EasyFLEX Adhesive Spray – Fire Classification EN 13501-1
Classification report for EasyFLEX Adhesive Spray in accordance with EN 13501-1:2018. The product is classified as A2-s1,d0 for the documented application.