Cart
0
0.00 kr.
What is EasyFLEX Flamesure?
EasyFLEX Flamesure is a fire-retardant membrane for professional system build-ups requiring a lightweight, flexible and technically documented fire barrier.
The material consists of a woven fibreglass substrate coated on one side with a halogen-free, low-smoke fire-retardant compound. Depending on the construction and documented application, it can be used as a fire barrier in membrane systems, façade build-ups, cladding and composite solutions.
Flamesure has been tested in accordance with EN 13501-1 and achieves an A1 reaction-to-fire classification for the documented application. The system build-up, fixing method, overlap, substrate and documentation requirements must always be assessed for the individual project.
Product highlights
Areas of application
EasyFLEX Flamesure is used in professional system build-ups requiring a fire-retardant membrane or fire barrier as part of the complete construction.
The product is particularly relevant where fire performance, smoke development, vapour openness and secondary protection against weather exposure form part of the project assessment.
Typical applications include:
- Membrane systems
- Façade build-ups
- Cladding solutions
- Composite systems
- Constructions requiring a lightweight, flexible fire barrier
- Projects where documented reaction-to-fire performance is part of the material specification
The specific application must always be assessed according to the construction, substrate, fixing method, overlap, exposure and documentation requirements.
| Product type | Fire-retardant membrane / fire barrier |
|---|---|
| Material | Woven fibreglass substrate with a halogen-free, low-smoke fire-retardant coating on one side |
| Application | Membranes, façade build-ups, cladding and composite systems |
| Fire classification | PASS A1 in accordance with EN 13501-1 for the documented application |
| Weight | Approximately 230 g/m² |
| Thickness | Approximately 0.195 mm |
| Tensile strength | >200 N/cm |
| Vapour openness | Sd value 0.06 m |
| Resistance to water penetration | PASS W2 |
| Standard colour | Natural |
| Standard sizes | 1,200 mm × 150 m, 1,200 mm × 50 m and 600 mm × 140 m |
The table shows selected key data. Always consult the technical data sheet and fire-classification documentation before use. Product suitability depends on the construction, fixing method, exposure, overlap, substrate and project documentation requirements.
How to use the product
EasyFLEX Flamesure is used as a fire-retardant membrane or fire barrier in professional system build-ups where its function forms part of the complete construction.
The material must be adapted and installed according to the specific solution, including the construction type, fixing method, overlaps, exposure and documentation requirements. Supplied in rolls, it can be integrated into systems where a lightweight, flexible fire-retardant membrane is required.
The installation principle, joints and terminations must always be selected according to the project requirements and the documented application.
Application notes
EasyFLEX Flamesure must be stored and handled correctly before installation. Keep rolls flat with protected cut edges in their original packaging until the material is required.
Protect the product from dust, heat, moisture, direct sunlight and solvent vapours during storage. When stored correctly in unopened packaging, the stated shelf life is at least five years.
Always consult the technical data sheet and relevant fire-performance documentation before use.
Documentation
Find the relevant documentation for EasyFLEX Flamesure. The technical data sheet and fire-performance documentation are collected here, so you can quickly access the file you need.
Technical data sheet
EasyFLEX Flamesure – Technical Data Sheet
Product description, applications, technical properties, standard sizes, storage and recommendations.
Fire testing and classification
EasyFLEX Flamesure – EN 13501-1 A1
Fire-performance documentation for Flamesure, including classification and the supporting test basis for the documented application.